Standard Samples-bed - CC120

Standard Samples-bed

Standard Samples-bed widely used in printing on the version, furniture manufacturing andareas such as ink color. It’s necessary equipment for quality control in the color management.

Standard Samples-bed with D65,D50,U30 standard light source, the use of microcomputer control, can quickly switch between different light sources;with chronograph function,separate records for each source of life.

Light Description

Different light conditions, the color of objects appear metamerism effect, they produce differentvisual effects, thus affecting the determination of the color the human eye. Use of internationally accepted standards of light look like the production of standard samples-bed, according to customer needs, can provide consistent with the customer to determine the color of the light source, such as D65, D50, TL84, UV, U30, CWF and so on.

Mainly by the lamp's life-cycle time and the cumulative number of starts with the decision.When the lamp are aging, light instability, two black and other phenomena, please change, otherwise it will affect the color detection.

Instructions
1. Connect the power
Before using, please be Standard Samples-bed connection with the match requirements of the powerstation. Time display will show the use of time, suggesting that power is on.

2. Press ON / OFF button, time display the total time the machine has been used.

3. Press the panel on the "1", "2" or "3" key, sample switching station will turn out D65, D50, U30 standard light source, the display will show the current time has been used light sourcelamp.

4. If you need to open two or more light sources, and press the key or two keys at the same time .

5.Putting the detected sample the middle of the observer on Standard Samples-bed was 45 ° line of sight observation items color.

6. Testing is completed, press the ON / OFF button to shut down.

7. When replacing a new lamp, the placement must be correct. While using time clear, specific approach: a good replacement lamp lit, with a small screwdriver into the center hole to the CLR, you can press the button a few seconds.

Technical parameters:
Light source: fluorescent tubes imported
36W D65 * 4 color temperature of 6500K
36W D50 * 4 color temperature of 5000K
36W U30 * 4 color temperature of 3000K
Power supply AC220V 50HZ
Table Size (mm): L1320 * W780
Dimensions (mm): L1320 *W800*T1700