plastic bottle filling and capping machine - 320

After air washing spraying tube is inserted into the preparing plastic bottle and spray and blow high pressure hydronium wind three times. Simultaneously taking out vacuum air three times in the mouth of the bottle to form a circular and convective channels through high pressure hydronium in the cleaned bottle. While eliminate the static in the plastic bottle, it can blow and suck out most of sundries of the plastic bottle.

Applying high pressure water to flush and pure water and injecting water has one time respectively. Finally clean air one time and then dry the inner of the bottle.

Continuously rotary filling adopts automatic flowing and equidistant and constant speed theory to go along the filler filling that dont bring liquid powder for mechanical friction in the liquid.

Applying un-touching heat jointing to connect bottle and compositely plastic cap that can make the jointing fixed. No pollution in the bottle.

No bottle will be non-transmission and non-cap-fastening. Have automatic venting function.

That PLC programmable controller and touching bottle operation have precise controlling and low malfunction and high automatization.

Technical Parameter

1. Applicable Specification: 100ml, 250ml, 500mL

2. Production Capacity: 1000----4000 bottle / hour

3. Single Air Washing Point: 30

4. Single Water Washing Point: 30

5. Single Filling Head: 15

6. Single Sealing Head: 30

7. Filling Tolerance: +/- 1%

8. Sealing Eligible Rate: ≥99.5%

9. Total Power: 32 KW 380V/50HZ

10. Main Engine Power: 4 KW

11. Heating Sealing Power: 24 KW

12. Cap-Arranging, Circinate Air Pump, Conveying Belt Motor Power: 4 KW

13. Air Pump Power: 7000L/min

14. Air Pump Vacuum Degree: 12000Pa

15. Air Consumption: 06Mpa 2000L/min

16. Flushing Pressure: 0.10.2Mpa

17. Pure Water Consumption: 1200L/h

18. Injecting Water Consumption: 1200L/h

19. Overall Dimension: 8500X2100X1900

20. Total Weight: 7500kg