High Speed Dry Laminator/Dry method Laminating Machine (GF-C) - GF-C

High Speed Dry Laminator/Dry method Laminating Machine (GF-C)

Application and Features:

The roll laminator is applied to laminating various roll materials, such as plastic film, PE( 25-150um),paper(30-150um), and aluminum foil(7-3um), etc, in two-layer or multi-layer manner.

This dry laminating machine adopts two sets of imported correction device, automatic tension control system and oven’s hot air circulatory system. In addition, the bottom and the side of the oven both can be opened. It has characteristic of simple operation, low noise, low energy consumption, high speed and little air pollution, etc.

1. Air-expansion shaft: for first unwinder, second unwinder and rewinder.

2. Photoelectric correction device: for first unwinder.

3. Auto tension controller: for the film on first unwinder,second unwinder and rewinder.

4. Mesh roller: for glue spreading;

Scraper from Switzerland: to oscillate when glue spreading.

5. Dual-frequency conversion adjusting speed technology;

Two Panasonic frequency converters:

one to control main motor and the other to control glue spreading motor.

6. Low friction pneumatic oscillating arm device at the entrance of oven: fully auto control the film tension in the oven

7.The inner of laminating hot-roller: heated by heat-conducting oil with even temperature and energy saving.

8. Pneumatic pressure machanism: for glue spreading pressing roller and laminating pressing roller, whose pressure can be regulated.

9. The total length of oven is 8 m;

The inner guiding rollers shaped in arch: driven by chain initiatively;

Walkway and guard rail: at the side of the oven.

10. The oven devided into four sections of independent temperature control:the temperature in every section can be regulated independently;

External electric heating system.

11. Stainless steel: for the inner of the oven

Hot air circulation structured in the oven: can save much energy

.

12. The air exhausting equipment in the entrance of the oven: discharges high concentration gas which volatilizes in the beginning

13.Imported photoeletric and hydraulic correcting system: at the exit of the oven.

14.Highly hardened and dynamic balance processing:

for all the aluminum guiding rollers