GYK high speed automatic flexo corrugated paperboard printing machine - GYK

Feeding part

1.Adopt back-kicking feeding type , absorbing wind auxiliary paperboard feeding, can make the cardboard feed favoringly. The volume of the wind can be adjusted accord the camber of the paperboard.

2.Vacuum suction assist paper feed to ensure stable high-speed operation and wind rate setting according to requirements.

3. Front baffle can be electrically adjusted with scale on it,easily understood. Side bar can be computerized adjusted,with digital setting and pneumatic appliance

4 Electric controlling the cluth of te machine platform and istalled alarm in order to assure the safe of he operating personnel while the bell rings constnatlty during marching

5 The movement of post bar can be computerized adjusted,with digital setting and manual adjustment of the scale

6 .Equipped with brust to suffciently eliminate dust and scraps as well as foreign subtances on the printing surface improve printing quality

7 .Skip feed device with continuous feed or every other page feed options.

8 Pneumatic interlocking mechanism

9 Equipped with clean foreign matter device on the printing face of the paperboard and improve the printing quality

10 The control center uses German Simens PLC and color touch screen,higher reliability,lower failure and higher efficiency, and is easy to learn and operate;the main machine and fan motor applies transducer speed regulation,stable and energy saving

Printing Part

1.The printing roller and trace pressing roller adop good quality without gap steel roller ,surface is treated by lapping finish, after balance correct and hard chrome plating, smooth operation.

2.Adopting the hang printing plate system,it is easy to change printing plate ,and installed switch by feet ,which is convinent to hang printing plate
3.International standard high-precision harmonic phasing device,PLC and touchscreen controlled 360 degree adjustment
4.Special planet gear desing enables long service life
5.Equipped with auto braking device with braking mechanism to lock rotation of pressplate roll and maintain the fixing point of original gears when the printing machine breaks away
6.With auto reset system after cleaning
7.Computerized digital axis adjustment,with adustment distance of ±10mm
8.Equipped with auto raising device onthe reticulate roll,separated the printing board when stopping feed paper
9.All the intervals adopt computerized adjustment and digital setting

10 Installed with ink roller rotation electrical machinery to prevent water ink drying while main machine stopping

Slotting part

1.Computer adjusting the height of the box is adopted in slotting unit.The length and width can be adjusted.It has upper and lower knives ,upper and lower rolling lines,cutting paper knife,pressing paper stick,and position adjusting devce with standard rulers by hand,which can save unit-changing time.

2.The scoring roller,the feeding roller and the slotter seat move axially ,guided by a rolling straight guiding track so that movement is stable and positioning is accurate.

3.The slot phase applies trasducer and touch screen control,can be electricallly regulated within 360-degree in numeral(both in running and stop),has restoration function,and can store orders.

4.A touch screen is set on the control panel that can control the ending section,printing section and slotting section,easy to operate.

5.Has central knife moving,being able to produce large-sized 2-pieces cartons.

6.The slotter shaft and the feeding roller shaft are hard-chrome plated and finely polished,enjoying long lifespan and no vibration during moving.

7.Punching device is optional according to users' necessity.