Specifications and Product Details:

1.glass ceramic dehydration
The glass ceramic dehydration has without joint, wear-resisting smooth , the friction coefficient is small, the material quality exquisite, thinks the same way characteristic. It can achieve the safety production, enhance the efficiency, reduce net consumed, and reduce energy absorption. It solved the difficult problem of use the high numerator not to be wear-resisting and use the ceramic, the net not wear-resisting. It is the second revolution of papermaking profession.

2. glass ceramic dehydration

It is unitary board, without joint. Special unitary form saved paper fiber.

Wear-resisting smooth, the friction coefficient is close to zero.

The dehydrated efficiency is high and uniformity. It has a good stabilization of the chemistry

performance.

The dehydration is professional and design according to actual machine.

3. glass ceramic dehydration

The glass ceramic dehydration compared with the other material dehydration, and the predominance as follows:

1).Ultrahigh molecular polyethylene: Good overall performance .But the materials of forming net and ultrahigh molecular polyethylene are soft and no ware-resistant, so the forming net ware faster. If downtime repairs, raise the cost of production.

2).The woodiness dehydration and glass dehydration : The overall performance same as the ultrahigh molecular polyethylene. Woodiness material is easy deformation; the rigidity and intensity of glass is weak and easy cracking.

3).Ceramic and alumina ceramic : This material is the new dehydrated material in the latter part of the 20th century, which the rigidity is strong. Foreign brands of ceramic dehydration proves that the friction coefficient is small. But production technology of Chinas brands ceramics dehydration is joint, and every burl is about 10mm. So the processing cost of ceramic is high. The processing of foreign brands of ceramic dehydration is fine but the price is high. As to changes in the temperature of entironment, the ceramic bars are changed. The forming net is easily broken.

4).The glass ceramic dehydration: It has the advantage of the four materials, overcome their shortcomings. The rigidity of glass ceramic dehydration is same as ceramics; the overall performance is same as woodiness and high molecular polyethylene; the Smooth Performance is same as glass and alumina ceramic. The glass ceramic dehydration is no joint, so it is not expand with the temperature changes. As to the high density and non-absorbent of glass ceramic dehydration, between the forming net and dehydration form a water film, so increase the lubricating, reduce the electrical load and reduce the wastage of the serous. The glass ceramic dehydration is also one of the advantages of adaptability. When a new glass ceramic dehydration used on the machine, if it is not adapted at the beginning, by running friction, the life of the second forming net is obvious increased. This is the incomparable Ceramics.

The glass ceramic dehydration compared with the ceramics and high molecular dehydration, and the predominance as follows:

It is unitary board, without joint. Special unitary form saved paper fiber.

Increasing the lubricating, reducing the electrical load and reducing the wastage of the serous.

Reduction of the loss of tiny fibers to improve the evenness of the paper, eliminate paper eye of the needle.

Save maintenance time and improve the production.

Solve the phenomena of pulp jump on the forming net, and increased speed.

Production Period short, easy installation.