Dark Heat Transfer Printing Paper For Textile

Dark heat transfer paper is a kind of Inkjet transfer paper for dark-colored cotton textiles. Suggest to using any color inkjet printers to print, ordinary water-based ink (such as: pigment ink or dye ink) can be used to print images. Thus, you can create your own personalized T-shirt, shirt, robes, sportswear, hats, bags, pillows, cushions, mouse pads, handkerchiefs, masks, home decorations, etc.

Pattern transferred through this transfer paper are of live and bright colors, soft, and washes well.

OPERATING PROCESSES AND PRECAUTIONS:

1. Printing
- Apply the transfer paper to a color inkjet printer. Recommend to select "Photo Quality Inkjet Paper" mode in the "Printer Media Type Setting" for satisfactory printing results.

- Print the image onto the transfer paper, and leave it to dry for about 10 minutes before transferring.

- Trim off the unprinted blank area, leaving the image a narrow margin of 5 mm.

2. Transferring
- Preheat the heat press machine, and set the recommended transfer temperature to 150-165°C.

- Peel the support paper from the printed (i.e. imaged) coating which would remain as a film-like material;

- Place the imaged coating (i.e. film-like material) onto the textile with the printed (image) side facing upwards.

- Place a sheet of protective paper on the image, with the glossy side of the protective paper facing downwards;
- Transfer for 15-30 seconds and then remove the textile, peel the protective paper after cooled.

3. Washing
- After transferring, it's best not to wash the textile in 24 hours.

- Wash the textile in 30-40°C water or cold water, with the transferred pattern inside out.

- Do not wash with strong alkaline detergents, and no bleach. Avoid rubbing the transferred pattern too hard.

- Do not wring. Line dry in shade recommended.

- Do not dry-clean.