BOPP Film Lamination Machine (GF-B1) - GF-B1

BOPP Film Lamination Machine (GF-B1)

Application and Features:

The lamination machine is applied to laminating various roll materials, such as plastic film, PE( 25-150um),paper(30-150um), and aluminum foil(7-3um), etc, in two-layer or multi-layer manner.

This lamination machine is the upgraded model of laminating machine GF-B our company produces. Structure of mechanical component is exactly the same with that of GF-B; advanced electrical appliance, such as dual-frequency converter and automatic tension controller, etc, controlling circuit by automation.

1. Air-expansion shaft: for first unwinder, second unwinder and rewinder.

2. Photoelectric correction device: for first unwinder.

3. Auto tension controller: control the tension of first unwinder, second unwinder and

rewinder.

4. Mesh roller: for glue spreading;

Scraper from Switzerland: to oscillate when glue spreading.

5. Dual-frequency conversion adjusting speed technology;

Two Panasonic frequency converters:

one to control main motor and the other to control glue spreading motor.

6. Low friction pneumatic oscillating arm device at the entrance of oven: fully auto control the film tension in the oven

7. The inner of laminating hot-roller: heated by heat-conducting oil with even temperature and energy saving.

8. Pneumatic pressure machanism: for glue spreading pressing roller and laminating pressing roller, whose pressure can be regulated.

9.The total length of oven is 7.5 m;

The inner guiding rollers shaped in arch: driven by chain initiatively;

10.The oven is heated by electricity;

The oven devided into three sections of independent temperature control:the temperature in every section can be regulated independently