bag water filling packing machine - JM-NG-1000

bag water filling packing machine

This machine can be widely used for packing various kinds of air –free liquid, especially for bag packing of soy sauce, vinegar, fruit juice and other beverages (or iced beverage), bean milk, milk, mineral water, bean curd and liquid chemical products

Technical parameters

Production Rate: 1500~2000 bags/h (for beverage like bean milk, milk, sauce, vinegar, etc).

Packing Capacity: 50~500ml/bag (step less adjustment)

Precision of Film: 240mm~320mm (optional)

Power: Motor 1 KW

Vertical sealing: 0.3KW;

Transverse sealing: 0.5KW.

Ultraviolet sterilize lamp: 15W

Voltage: 220V 50Hz

Weight of Machine: 400KG

Oversize: (LxWxH) 97x87x197cm

bag water filling packing machine

Functions

(1) Bag-shaping (2) Ultraviolet sterilization

(3) Thermal vertical sealing (4) Date lamination

(5) Linear bag traction (6) quantitative filling

(7) Thermal transverse sealing (8) Bag-cutting

(9) Automatic counting

Maintenance

5.1, After use, wash away residual liquid in the pipe with water. Otherwise the residual liquid will be degenerative and affect the quality of product of next production. Remove plastic pipe transfusion and clean it with a brush. Keep it clean and dry.

5.2, Regularly check moving parts and oiling state and oil the machine with sufficient 20# lubricant or lithium based grease at any time. Otherwise the operation will be out of order and that will severely affect service life of machine.

5.3, Regularly check the machine and clean away foreign matters on the surface of transverse copper block. It is not allowed to have encrustation on the surface. Otherwise thermal conductivity will be reduced, the temperature of copper will rise, and hot transverse sealing and thermal cutting bag will be out of order.

5.4, In the case of finding abnormal phenomena, cut off power supply immediately. Restart after troubleshooting.

5.5, During production in winter with temperature under 0°C, unfreeze the ice in quantitative pump and the pipes with hot water. Otherwise, connecting rod will be broken or the machine does not work.

5.6, Single sheet plastic film for the machine should be 80mm thick. The tension strength, even thickness, and lubricating property of film should be guaranteed. The weight of each roll of plastic should be controlled under 18kg (320mm) or 14kg (240mm). Transverse hot sealing temperature should be under 260°C. Poor thermal sealing or high failure rate of bag caused by employing single sheet plastic film not recommended by the manufacturer are not within extent of liability borne by the manufacture. Are not within extent of liability borne by the manufacture.

Warm reminder!

Angel drinking water equipment co.,ltd all staff warmly welcome new or old customers come for consultation, we will be making detailed project plan, to realize low cost, high efficiency and scientific process combination. In order to make pouch filling machines achieved your ideal requirements.(bag water filling packing machine

)