automatic paperboard printting slotting/ flexo printer slotter - GYK

1effectice printing size:1250*2200/2400/2600
2 fully automatic high speed
3 electric appliances adopt SIEMENS

1.Adopt lead edge (back-kick) feeding paperboard type , absorbing wind auxiliary paperboard feeding, can make the cardboard feed favoringly. The volume of the wind can be adjusted according to the camber of the paperboard.

2. One pair of upper and lower feed rolls with gap adjustment electrically

3.Front baffle can be electrically adjusted with scale on it,easily understood. Side bar can be computerized adjusted,with digital setting and pneumatic appliance
4.It can send

4 Electric controlling the cluth of the machine platform and installed alarm in order to assure the safe of the operating personnel while the bell rings constnatlty during marching

5 The movement of post bar can be computerized adjusted,with digital setting and manual adjustment of the scale

6 .Equipped with brust to suffciently eliminate dust and scraps as well as foreign subtances on the printing surface improve printing quality

7 .Skip feed device with continuous feed or every other page feed options.

8 Pneumatic interlocking mechanism

9 Equipped with cleanforeign matter device on the printing face of the paperboard and improve the printing quality

10The control center uses German Simens PLC and color touch screen,higher reliability,lower failure and higher efficiency, and is easy to learn and operate;the main machine and fan motor applies transducer speed regulation,stable and energy saving

Printing-section:

1-Printing Roller (with printing plate) phase can be motorized operated of adjusted

at degree 360 clockwise or anti-clockwise .It can be operated under running

or stop conditions.

2 -Printing Roll precisely grinded with hard chromed treatment and dynamic balance test.

3-Printing roller can be micro adjusted for cross movement width left and right

distance limit:10mm.The effective limit:

4-Auto-zero adjust for printing unit.

F-Motor-operate electric foot pedal to assist manual installation plate and rotate

printing roll.

5 -Gap micro adjust between pressure roller and printing plate roller.

Ink roller

1-Ceramic anilox roll with rubber doctor roll ,the line density is 350 LPI and origin from Taiwan

2-Ink plate is adjusted though down air pressure action .When the air is not supplied and

the safety device is automatically started. The centre of transmission gear has no change.

3-Gap micro adjust between anilox roller and printing plate roller.

Rotary-die-cutting-section:

1-The die cutting roller are made of high quality alloy steel materials ,30mm thickness,balance correction ,hard-chrome plating .wallboard are made of high quality steel materials,50mmthickness made by larger processing center production.

2-.The phase of the die cutting until & the horizontal moving of the die cutting roller adopt PLC and electric 360 degree adjustment according to the error to input the adjust data,can be adjusted while the machine running or stop.

3-.the rubber roller adopt mechanical control the left &right position move,the movement distance is 40 mm.

4-.the space adjustment between rubber roller and die cutting roller adopt self-locking structure,with cylinder big scope quickly adjust,decrease the rubber wear,increase the rubber life.

5-.Main Motor: frequency conversion motor ,all of electric application adopt the product of SCHNEIDER made in FRANC