Automatic oil filling machine 6000BPH(500ml PET bottle) - GY

Main technical parameters

• model: GYH20-5
• working position: filling head: 20; capping head:5
• capacity: 3000BPH (1000ml)
• suitable bottle diameter: φ50~φ200
• suitable bottle height: 150~360
• material feeding pressure: 0.03~0.08 MPa
• inner vacuum: -50~80mbar
• air source pressure: 0.6~0.7MPa
• air consumption: 0.5M³/min
• main motor power: 1.5KW
• cap unscrambling motor power: 0.37KW
• vacuum pump power: 1.5KW
• pressed cap vacuum pump power: 0.75KW
• total power: 5.5KW
• voltage: 380V,50Hz
• dimension: 2200×2700×2700(L×W×H)
• Weight: 3500kg

Brief work process:

These bottles are transmitted to the “Filling machine” via the “Bottle-turning star wheel”. These bottles entered the “Filling machine” are folded by bell jars and elevated up to touch with filling valve by the lifter cylinder. Before entering filling machine, there is a button for inspecting bottles on the steel thumb wheel. It sends the bottle signal to control the opening valve mechanism, then the filling valve would be opened. The filling shall be started while air injection is reached to state of equipressure. The filling could be stopped automatically when the liquids level reach to the height of air return pipe. The filling valve is closed recur to valve-closing mechanism after filling. Bottles full filled come down to be off filling valve under the function of cam and be put into the “capper” via transitional thumb wheels. The bladed stopper on the “capper” locks the bottleneck to keep bottles erectly and avoid rotating. The “cap head” keeps revolution and rotation on the “capper” and carries out these movements of cap picking, cap covering, screw capping and cap unhitch etc. after that whole capping process is finished. The “cap aligner” is situated above the “screw capper”, it is connected with the cap pan of “capper” via the cap sliding rail. The finished bottles are transmitted to the bottle output conveyor chain via the bottle output thumb wheels. And which are transmitted out from the oil filler by conveyor chain and put in the next process.