1)Full-automatic
2)front and back labeling one time
3)Small floor place
4)Low noise
5)Automatic double side wet glue lable
Port: Shenzhen China
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 50 Set/Sets per Month
Payment Terms: L/C,D/A,D/P,T/T
Contact SupplierPackaging Detail: Wooden Case
Delivery Detail: 30 days receiving payment
Automatic double side wet glue labeling machine SR-LB04
SR-LB-04 Wet glue double sides Labeling Machine | |
Labeling speed | 30-80b/min |
Labeling precision | ≤±1mm |
Label length | 50-500mm |
Label width | 40-130mm |
Bottle high | 50-350mm |
Bottle diameter | 60-100mm |
Power | 220V 50(60)Hz 2.1kw |
Machine size | 2400*950*1200mm |
Weight about | 700kg |
Apply field | glass and plastic round bottles |
Operating principle:
This machine adopts the design first in stick mark scalloped turned pole again by rubber wheel stick take a few glue and then to label transmission device in sticky get a tag,to vacuum,saction paper roller position,by off label grasp take off label.At the same time will label switched to vacuum sheet transfer belt,use the vacuum suction,make tags adhere to the sheet transfer belt,use the vacuum suction,make tags adhere to the sheet transfer belt into the labelling area,make tags enclosed by chain coveyor esther in the bottle.So circulates movement,the complete machine production process.
Operation procedure:
(1)Using manual machine,again affirmatory roulette move and the adjustment of various spare parts in the correct position.
(2)Place glue and tag:put a label first label fan shape,after finishing in tags within the transmission device.
(3)System power on.
(4)Sure air pressure is normal or not.
(5)Press the vacuum switch.
(6)Will point start/continuous conversion switch twist to the point start position in press host switch make glue adhesion fan-shaped turn stern.
(7)Will products(bottle)placed in a conveyor belt.
(8)Contact switches must and switch indicator lamp also bright.
(9)Will point start/continuous conversion switch twist to continuous position in press host switch began to work.
(10)Determine wherher attached with a right,if not ideal may engage in trace adjustment.
(11)Check the bottle and tags into labeling place time is correct.
(12)Suction paper roller and fan-shaped turned pole in attached with a stick,whether have taken diffferent sound.