8 In 1Sublimation Machine - ZSM-007

8 In 1Sublimation Machine

Multifunctional heat press machine is consisted of 8 accessories they are:Tshirt heating plate ,mug heating plate(4 sizes),cap heating plate and plate heating plate (two size).
This machine enjoys multifunction in one machine,it can be used for transfering on tshirt,mug,plate,cap and so on. Moreoverthe heating accessory can bejoined .

It can be circumvolved 180degrees and is convenient to take off the transfered materials and can be used for transfering on certain thick materials ,

you can replace the heating plate easily and conveniently without using any special tools.

Specification:

1. Automatic and steady electronic digital temp display,High accuracy individual circuit controller box.

2. Heating cylinder and heating board are integrated , safe and durable

3. Automatic time controller

4. Endure high temp silicon sheet,make the pressure more evenly ,can be turned up to 180degree

5. Convenient to adjust the pressure,the image can be transferred on the tshirt ,tie,mug,cap ,tiles plate and so on.

6. Heating accessory can be extended,small size,many functions

Paramete

Voltage: 110/220V
Power: 450-1,200W
Temperature range: 0 - 399°C
Actual weight: 44kg

Package Size : 52X48X51CM
Timing range: 0 - 999sec.
Diameter:5-7cm,7.5 - 9cm,12oz cone,17oz cone for mug
Diameter :12cm and15cm for plate

Diameter :80X150MM cap
Diameter :28x 38cm

Usage

1.Turn up handle bar,let the machine open. Put the materials which you want to do the transfer on the working table ,adjust the pressure

(turn clockwise to add the pressure,turn anti-clockwise to reduce the pressure)

2.Open the machine,,prepare the materials.(to avoid burning out, Pls don’t put the materials on the working

table when it is in the process of heating )

3.Connect the power line which comes with the machine,turn the power on ,the controller will check automaticly ,the machines will work after 10secs,

then you can set the time and temp (for the first time pls set the right time and temp,more details you can see the usage of the display of controller box.)

4.Set the temp and time,machine start heating up (then arrive at 200degree,it needs about 15minutes)

5.When the temp arrives at which what we set ,put the materials on the working table, then turn down the handle bar,and the time begins to count ,

when the time’s up ,machine alarm ,turn up the handle bar ,then finish it..

ATTEN:The function of the temp controller is complex,pls dont press any button for other operation unless you set up the temp ,

otherwise the process of the controller will be damaged !!!