1880mm high speed tissue paper making machine - 1880

1880mm high speed tissue paper making machine

contact miss bonnie 24hours hotline: 0086-13503851305

1880mm high speed tissue paper making machine

Technical data:
1. Output paper: top quality toilet paper,tissue paper.
2. Raw material: virgin pulp
3. Output weight:13-20g/m2
4. Capacity: 5 tons per day
5. Net paper width: 1900 mm
6. Wire width:235 mm
7. Working speed: 170-190 m/min
8. Design speed: 210 m/min
9. Rail gauge: 2900 mm
10. Drive way: AC frequency converter and adjustable
speed, processing transmission.
Cylinder par:One stainless-steel plate type cylinder (1500×2350×2900). Equipped with bearing (113622) and
one set of mould former (spray type). Speed regulation holy roll make the finished paper having the good
evenness. Consistency is about 0.1%-0.15%.mesh count(90-100) more than 2layers .when the pulp go on the
mesh ,it will not throw pulp and won't leave any trace during the production, the finished paper has good
strength and evenness in vetical and horizontal.
Couch roll(400×2350×2900).the material of roll body is seamless steel pipe.thickness is 14mm.roll surface
rubber coating thickness is 25mm.shore hardness “A”30-35°.equiped with bearing (113518) The stander of the
cylinder part weld with shaped steel.and the thickness is 10mm.
Washing device of cylinder part:spray pipe washer adapt water pressing type .spray pipe DG32 stainless steel.
Ceramics hard wearing nozzle.
Felt washing part:high pressure cleaning device 2 sets, spray pipe washer adapt water pressing type .spray pipe
DG32 stainless steel. Ceramics hard wearing nozzle.
Vacuum suction box:4sets in all .1 set(150mm)3sets (250mm).box body is welding with steel plate.board
surface material is supra polymer polythene . Body frame is iron casting.material quality(HT200).upright
post(400mm).the height of dryer crossbeam is 400mm
Dryer can ( 2500 × 2350 × 2900)bearing type dryer can.equiped with bearing (3113156),no patch on the
surface of dryer can,shore hardness of dryer can is more than 210°. Scraper of dryer can is gas dynamic type,include air control
chest,air cylinder.
Touch roll ( 550 × 2350 × 2900),roll body(iron casting)surface rubber coating thickness is 25mm,shore
hardness is 93°, pneumatic pressurizing ,include tyre,air control chest but not contains air pump.equiped with
113632bearing.fluted rolls.
sink roll: 194×2450×2900,seamless steel pipe(skin thickness of the steel pipe is 12mm ) .surface
chromeplate .equiped with bearing(3612).
spreader roll: 230×2350×2900,rubber costing of the surface,and the thickness of the rubber is 15mm,
shore hardness 93°,equiped with bearing 3612. Exhaust hood of the dryer can is type of
respiration.include blowing fan,draft fan,radiator. This machine is equiped with electromotion blanket
tighting implement.air adjust blanket implement.
Winding part: sweat cylinder 900×2300×2900, equiped with bearing(113520 ) ,thickness is 14mm, the frame of
sweat cylinder is box shaped, welded with steel plate, paper streth roll shaped arch with 73mm, covered by
cauterize. Soft pressure roll 240×2300×2900mm, made by seamless steel pipe ,covered with rubber 20mm, the
hardness of rubber is HSD 35°, bearing equiped with 3612.
Winding roll 50mm , is equipped with seamless steel pipe
Basic part:
360 x 2700 three slots ground track 2 pcs
230×2100 single slot ground track 2 pcs
230×1500 singel slot ground track 4 pcs
electromotor, reducer ground track 8 pcs
Drive part:Drive point reducer motor Dryer can JZQ500 40KW Winding machine JZQ250 4KW
Sanken frenquency conversion adjust speed made inJapan.(reducer adopt all gear tooth surface )

1880mm high speed tissue paper making machine related pictures as follows :